Fibre Optic Blowing Machines

Fibre Optic Blowing Machine

Fibre Optic Blowing Machines are used extensively throughout the global telecommunications and fibre optic cable installation networks and enable single length,mid-point and series fibre optic blowing. The fibre blowing machine uses compressed air to propel the fibre bundles through the duct. This method of fibre blowing provides a consistent, uniformed pulling force along the full length of the fibre.  In addition to a consistent pulling force, Condux Fibre Optic Blowing Machines provide smooth control, movement and fibre monitoring which is controlled by a air driven powered belt system.  Over all this provides a safe and optimised method of fibre optic laying and installation which can improve productivity and reduce workforce requirements.  Condux Fibre Optic Blowing Machines are designed to be east-to-use without tools and simple to adjust in order to meet site requirements and conditions.

Gulfstream™ 100 Fibre Optic Blowing Machine

The New Gulfstream 100 Fibre Optic Blowing Machine!

The next generation in Fibre Optic Blowing Technology is here! The new Gulfstream 100 (GS100) incorporates an extremely efficient air delivery system that the unit uses less airflow compared to the other blowing heads. As a result, this allows the GS100 to blow to the same standard with considerably smaller air compressors, such as petrol engine driven Condux electric and petrol fibre blowing compressors, which both weigh under 25 kg.

For more information and specification, please see Gulfstream™ 100 Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

Gulfstream™ 150 Fibre Optic Blowing MachineGS150 Unit

The self-contained Gulfstream™ 150 utilises a compact motor driven wheel to propel microfibre into microduct.
When combined with compressed air, the Gulfstream™ 150 will quickly and efficiently install fibre ranging from 1.0mm to 2.5mm into duct ranging in size from 5mm to 8mm – at speeds up to 375ft (115m) per minute!

The Gulfstream™ 150 excels at the most demanding enterprise applications.
The unit’s machined aluminium construction provides a lightweight profile with long life and durability. The Gulfstream™ 150’s compact size and convenient carrying case allow for easy transport between job sites.

For more information and specification, please see Gulfstream™ 150 Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

Gulfstream™ 200 Fibre Optic Blowing Machine

GS200 Unit

The self-contained Gulfstream™ 200 combines the push force of a small

electric motor driven belt drive with compressed air to quickly and easily install micro fibre cables from 2.0mm to 5.5mm in diameter in microduct ranging in size from 5mm to 12.7mm, at speeds up to 165 ft/ min (50 m/min) per minute!

The unit’s machined aluminium construction provides a lightweight profile with long life and durability. The Gulfstream™ 200’s compact size and convenient carrying case allow for easy transport between job sites.

For more information and specification, please see Gulfstream™ 200 Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

Gulfstream™ 300 Fibre Optic Blowing Machine

GS300 Unit

The Gulfstream™ 300 is an effective and economical approach to middle mile fibre optic installations. Able to install fibre optic cable ranging in size from 3mm to 10mm into duct from 7mm to 18mm, the Gulfstream™ 300 offers the portability, convenience and power for standard middle projects in a cost effective package.

The unit features user-friendly controls that help optimize the fibre optic cable installation process.

For more information and specification, please see Gulfstream™ 300 Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

Gulfstream™ 400 Fibre Optic Blowing Machine

The Condux Gulfstream™ 400 Fibre Optic Cable Blower is designed for the installation of fibre optic cables with diameters from 0.23” (5.8 mm) to 1.13” (28.7 mm) into microduct. The Condux Gulfstream™ 400 Fibre Optic Cable Blower is ideal for “Last Mile” Fibre Installations.

Install up to 300 feet of fibre optic cable per minute (90 m/min). The cable travels at the same speed as the air! A carrier is always attached to the front of the cable. Compressed air propels the carrier and cable through the air-tight sealed duct. And, because air flow and tractor drive speed can be adjusted, you can install fibre at the rate which best suits any application.

The Condux Gulfstream™ 400 Fibre Optic Cable Blower features longer tractor feed grip area for less stress on the
cable, and a manual cylinder on the tractor feed to better control down pressure. Condux’s patented traction control system shuts down the blower when problems with cable slippage or duct blockage are detected, adding safety to every job and preventing costly cable damage.GS300 Full Kit

For more information and specification, please see Gulfstream™ 400 Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

Condux TurboSlitter™ – Cordless Drill Attachment (P/N: 08010220)

 

The TurboSlitter™ from Condux can easily split HDPE pipe with wall thickness ranging from 0.097 to 0.216 inches!

The cordless drill attachment quickly adjusts to fit almost anyTurboslitter-drill with case
rechargeable drill, 14-volt and larger.

Save time and effort on the job with the TurboSlitter™ from Condux

  • Lightweight shear head for easy one-hand control.
  • Telescoping clamp fits large or small drill housing.

Note: Drill Not Included. 

For more information and specification, please see Turboslitter™ Datasheet at the bottom of the page.

Alternatively, you could contact us via email or call our office on 01767 691414 to find out more.

 

 

 

We are Condux International Inc.. UK and Northern Ireland’s only Distributor. Condux International the premier manufacturer of underground and overhead cable installation tools and equipment for the telecoms and electric power markets. Condux machines allow safe, quick and easy installation of fibre optic cable and power cables.

 

Not sure which solution fits you business needs?